HOW TO RESET THE INFINITI JX35 (QX60) MAINTENANCE LIGHT AND DISTANCE (2013-2020)
Push the Infiniti JX 35 (QZ 60) START/STOP Button without your foot on the brake pedal to put the vehicle into Run Mode or start the engine.
Press the INFO button underneath the information display screen.
Select MAINTENANCE INFO by scrolling using the scroll wheel and then pressing ENTER using the scroll wheel.
Select ENGINE OIL by pressing the ENTER button.
Scroll down and select RESET DISTANCE.
Press the BACK button. (underneath the scroll wheel)
Select OIL FILTER.
Scroll down and select RESET DISTANCE.
Press the BACK button. (underneath the scroll wheel)
Select TIRE.
Scroll down and select RESET DISTANCE.
Press the BACK button. (underneath the scroll wheel)
Select OTHER REMINDER.
Scroll down and select RESET DISTANCE.
Press the BACK button. (underneath the scroll wheel)
The 2013-2020 Infiniti JX35 (QX60) Service Required Maintenance reminder should only be reset after changing the oil and oil filter on the car.
Why It's Important to Reset the Infiniti JX35 Service Maintenance Reminder Light
It’s vital to reset the maintenance information distance on your Infiniti JX35 (QX60) to keep track of when your next oil change is due and to evaluate the condition of your engine oil. This action is essential in knowing when to schedule your next maintenance visit.
KEEP A PERSONAL RECORD OF ALL MAINTENANCE
It’s beneficial to meticulously log every oil change and maintenance procedure conducted on your Infiniti QX60. Keeping all service documents is crucial. This method helps keep your Infiniti in prime condition and creates a comprehensive record of its maintenance history, which can be advantageous if you plan to sell the vehicle in the future.
Infiniti JX35/QX60 Oil Type and Quantity
The 2013-2020 Infiniti JX35 (QX60) 3.5L 6 Cylinder engine requires 5.07 Quarts of 5W-30 Synthetic oil.
Synthetic or Conventional Oil?
A common question I receive is about the necessity of synthetic oil for the Infiniti JX35. Here’s my recommendation:
Follow the manufacturer’s guidelines first and foremost. Consistency in the type of oil used in your engine is important. If your Infiniti QX60/JX35 has consistently used synthetic oil, it’s crucial to continue using it. Conversely, if you’ve been using conventional oil or a synthetic blend, stick with that type. The key takeaway is this: Avoid alternating between different oil types; select one and consistently use it.
TIP: Bring your own oil to your local shop to save money on oil mark-ups.
How Often Should You Change the Oil on Your Infiniti JX35?
Changing the oil in your Infiniti JX35 every 3,000 miles is recommended. Despite some suggestions for longer intervals, sticking to a 3,000-mile routine is advantageous for your vehicle’s engine health and efficiency. Regular oil changes help keep the engine in excellent condition and provide an opportunity for a comprehensive inspection at each service, aiding in the early detection and resolution of small problems.
Why Isn't the Infiniti JX35 Maintenance Light Reset Process Working?
If you’re having trouble resetting the maintenance info distance in your Infiniti JX35, it might help to redo the process. Begin by switching off the ignition, then turn it on and off again. After that, restart the maintenance reset process for your Infiniti JX35 (QX60). Ensure that the hood and all doors are securely closed before following the reset process.
Why is the Infiniti JX35 Maintenance Light Still On After An Oil Change?
Just replacing the oil and oil filter in your Infiniti QX60 (JX35) does not mean the maintenance info distance will reset by itself. If the maintenance reminder doesn’t update following an oil change, it generally indicates that the reset process wasn’t carried out after changing the oil, possibly because it was forgotten.
How Do You Know When the Infiniti JX35 Needs an Oil Change?
Each time you get an oil change in your Infiniti QX60 (JX35), make sure there is an oil change sticker on the top left of the windshield. This signifies when the oil change was last completed and when you will be due for one in the future. Also, the Infiniti maintenance system will let you know when the vehicle needs to be serviced as long as the maintenance light is reset every time the oil is changed.
8 Steps To Keep Your Infiniti JX35 in Top Condition:
1. Check Tire Pressure and Tire Tread
To find the suggested tire pressure for your Infiniti QX60, look for the white label on the door frame, visible when the driver’s door is open. The correct tire pressure for the Infiniti JX35 and QX60 is 35 Psi for both front and rear tires. To avoid overinflating, inflate the tires when they are cold, either three hours after driving or before starting to drive. For checking the wear on your tire treads, you can either use a penny test or a tread depth gauge.
2. Rotate Your Tires
We advise rotating the tires of your Infiniti JX35/QX60 with every other oil change, assuming you’re following our suggested 3,000-mile oil change interval, or otherwise every 6,000 miles.
TIP: If your local shop or dealership recommends tires on your Infinti JX35, check your tire tread yourself with a tire tread depth gauge!
3. Check the Coolant Level
Ensure that the coolant in the reservoir is between the minimum and maximum lines. A flashlight can help you see more clearly inside the coolant tank (not referring to the radiator). Since the coolant system is sealed, a noticeably low coolant level might indicate a leak. To identify any leaks, performing a pressure test on the coolant system is a reliable approach.
4. Check the Brake Pads and Rotors
Check the brake pads on your Infiniti JX35’s front and rear brakes to make sure they’re thick enough. Use a brake pad gauge for an accurate thickness measurement. Also, look at the brake rotors for rust, hot spots, or any irregularities. When your Infiniti QX60 or JX35 is raised on a jack or lift, spin each wheel by hand (with the parking brake off) to see if they turn smoothly. If a wheel doesn’t move easily, it could mean there’s a problem with the brake caliper or stuck slider pins in the caliper.
5. Check Brake Fluid Reservoir
It’s important to keep the brake fluid reservoir in your Infiniti QX60/JX35 full. If the brake fluid is below the full mark, it might mean there’s a leak or the brake pads are too worn. If the brake fluid is low, fill up the reservoir, press the brake pedal a few times, and then look at the brake calipers and lines for any signs of wetness or leaks.
6. Check Washer Fluid Level
Top up the washer fluid in your reservoir. In colder months or during the winter season, opt for a washer fluid that contains antifreeze to prevent it from freezing in the container.
7. Check the Engine and Cabin Air Filters
Open the engine air filter boxes (there are two) in your Infiniti QX60 or JX35 and remove the air filters. Clean it with compressed air, a vacuum, or by shaking off any dust, leaves, and debris. If the air filter is very dirty, replace it. If it’s not too dirty, put it back. Also, check the cabin air filter located behind the glove box, which cleans the air inside the car. Replace this filter if it’s dirty or has never been changed.
8. Check Power Steering Fluid
Ensure that the power steering fluid in your Infiniti JX35 or QX60 reaches the ‘full’ line on the reservoir. Any level below this mark may indicate a leakage in the power steering system. In case the fluid is low, top it up to the appropriate level. Afterwards, inspect the power steering rack and hoses for potential signs of leaking.
Benefits of Regular Oil Changes
In my experience as an auto technician over ten years, I’ve seen that cars not serviced regularly often have more and bigger problems. Even though some car makers, like Infiniti, say you can wait 5,000 to 25,000 miles between oil changes, I suggest changing the oil every 3,000 miles for the Infiniti JX35 or QX60, no matter what the manufacturer says. This helps keep the car running well and makes the engine last longer. Regular oil changes reduce engine wear and can make your JX35 up to 2% more fuel-efficient. They also keep the engine cleaner and stop harmful deposits from shortening the engine’s life.